Completed Projects

Project Location: Thrissur Laboratory
Project Type: Sponsored Project
Project Code Project Name
TH/SP/034 Development of Supercapacitor and applications in electronic circuits
TH/SP/033 Development of transparent conducting oxides through solution processes for thin film electronics
TH/SP/043 Development of Graphene based Super capacitors for Energy Storage and Frequency Regulation in smart power grids
TH/SP/037 Preparation of carbon aerogels & development of aerocapacitor for Electronic applications
TH/SP/030 Development cum production and supply of Microwave substrates for 750 W solid state amplifiers
TH/SP/047 Development of graphene based transparent electrodes for thin film acoustic actuators and sensors
TH/SP/050 Development of graphene supercapacitors for power electronics
TH/SP/039 Development of light triggered graphene polymer nano-composite actuators
TH/SP/053 Development, production and supply of Microwave substrates
TH/SP/044 Dr K V Baiju Development of nanostructured titania photoanode for dye sensitised solar cell applications
VK-1 Development and pilot production of Nano-PZT compositions and Piezoceramic components for Underwater SONAR Transducers, Ultrasonic cleaners, and Medical applications
TH/SP/042 Development and pilot production of Nano- ZnO for electronics and deep-desulpharisation catalyst applications
TH/SP/015 Developement of BMT ceramics for space applications
TH/SP/009 Development of high permittivity polymer ceramic composite substrates for Microwave communication application
TH/SP/011 Development of temperature compensated high permitivity polyceramic laminates for Microwave substrate application
TH/SP/019 Development of polymer woven glass based low permitivity and low Microwave substrate
TH/SP/026 Development of ultra low loss temperature stable composite substrates for high power Microwave amplifiers
TH/TS/030 Development,production and supply of Microwave substrates for high power Microwave amplifiers.
TH/SP/041 Development and pilot plant production of high permittivity and low loss ceramic fill PTFE substrates for Microwave circuit application
TH/SP/048 Development of low loss and medium permitivity composite dielectric for radial power combiners
TH/SP/046 DEV.OF TITANIA AEROGEL PHOTOANODE FOR DYE SENSITIZED SOLAR CELL
Th/SP/029 Pilot plant production of 300Kg of phase pure Cristobalite for space applications
TH/SP/027 Synthesis of Nano NTC Material and Development of Chip in Glass Fast Response Thermal Sensors
TH/SP/039 Development of light triggered graphene/polymer nanocomposite actuator
TH/SP/043 Dev. of Graphene based Supercapacitors for energy storage and frequency regulation in smart power grids
TH/SP/047 Dev. of graphene based transparent electrodes for thin film acoustic actuators and sensor
TH/SP/050 Dev. of graphene super capacitors for power electronics
TH/SP/020 Dev. of Aerogel for button cell Supercapacitors
TH/SP/034 Dev. of Supercapacitors for Applications in Electronic Circuits
TH/SP/035 Dev. of Nanoparticles doped Aerogel based Hydrogen Storage Materials
TH/SP/037 Dev. of Aerocapacitor for Electronic Applications
TH/SP/032 Piezoelectric based Bimorph Mirror
TH/SP/038 ML actuators for MEMS based micro valve
TH/SP/048 Development of low loss and medium permittivity composite dielectric for radial power combiners
TH/SP/033 Development of transparent conducting oxide through solution processes for thin film electronics
TH/SP/049 Development of Thin Film Solar Cell with Earth abundant Kesterite Absorber
TH/SP/036 Multilayer actuators for MEMS based micro valve
Project Location: Hyderabad Laboratory
Project Type: Sponsored Project
Project Code Project Name
HD/SP/027 Development of CdS/CdTe thin film solar cells by electrochemical technique using indigenously produced starting materials
HD/SP/022 Establishment of extended pilot plat facility at C-MET Hyderabad for preparation of 320 kg hafnium sponge
HD/SP/010 Development of ultra high purity gallium for epitaxial electronic & optoelectronic applications
HD/SP/035 Silicon Carbide (SiC) single crystal bulk growth process development
HD/SP/030 Synthesis & photocatalytic activity of bulk & nanosized metal titanates
HD/SP/028 Ultra-high purification and preparation of crystalline germanium for detector and optoelectronic applications.
CMET-HD/SP/026 RoHS testing of mobile cellular phones in the Indian Market
CMET-HD/SP/025 Development of Ultra High Pure Gallium for epitaxial Electronics & opto-electronic application.
CMET-HD/SP/024 Environmentally sound methods for recovery of metals from printed circuit boards (PCB’s)
CMET-HD/SP/023 R & D of new materials based on recycling of reactive and refractory metal scrap through electron beam method (Indo-Bulgarian Scientists exchange Program
CMET-HD/SP/021 Ultrahigh quality Silicon Carbide (SiC) single crystals by physical vapor transport (PVT) technique for advanced electronic devices.
CMET-HD/SP/020 Design and development of controlled melting and freezing system for preparation of ultra pure crystalline materials for opto-electronics.
CMET-HD/SP/019 Process technology development of ultra pure Cadmium for opto-electronic applications
CMET-HD/SP/018 Establishment of testing facilities for the hazardous substances as per European Union (EU) Directive of Restricting the use of hazardous substances (RoHS)
CMET-HD/SP/017 Microwave sintering of refractory metal and alloy powders and properties characterization
CMET-HD/SP/015 Pre-production studies of Niobium & Hafnium for establishment of production plant
CMET-HD/SP/016 Studies on the synthesis and phase transformation of FePt nano particles for Data Storage Applictions
Project Location: Pune Laboratory
Project Type: Sponsored Project
Project Code Project Name
HD/SP/022 Establishment of extended pilot plat facility at C-MET Hyderabad for preparation of 320 kg hafnium sponge
PN/TS/011 Study on synthesis of nano-aluminium powder by transferred Arc Thermal Plasma Technique
PN/TS/007 Accelerometer / gyro packages and mechanical components
PN/SP/038 Development of stable Pt and Ni doped nanostructured ternary semiconductor catalysts for solar hydrogen production by water splitting
PN/SP/034 Hybrid Solar Cells based on Organic Polymers and Inorganic Nanoparticles
PN/SP/029 Q-Semiconductor -Glass-Nanocomposite for Optical and Energy ( Using Solar Light) applications.
PN/SP/052 Development of microwave substrates in LTCCCF
PN/SP/036 Hydrogen production using nanostructured Fe: TiO2 and N: TiO2 thin films and powders
PN/SP/035 Development of green low temperature firable thick film peizoresistive composite pastes for strain gauge applications
PN/SP/040 Development of prototype aprons, glass sheets and curtains from Lead free X-Ray absorbing materials
PN/SP/039 Development of optical isolators using quantum dots based photonic glasses
PN/SP/043 In-house development of photo-conducting paste (using semiconductor nanostructures) for exploration in photo patternable thick film technology for advanced optoelectronic applications
PN/SP/044 Development of the prototype photoreactor for the hydrogen production from H2S Under natural sunlight
PN/SP/042 Novel solar light driven bismuth sulphide quantum dot-glass nanocomposite photocatalyst for hydrogen generation.
PN/SP/032 Development of Advanced processes in LTCC
PN/SP/021 Development of multilayer LTCC substrates for Thin Film Gas Sensors
PN/SP/013 Technology Demonstration of Multilayer LTCC Packages for MEMS application
In-house development of photo-conducting paste (using semiconductor nanostructures) for exploration in photopatternable thick film technology for advanced optoelectronic applications In-house development of photo-conducting paste (using semiconductor nanostructures) for exploration in photopatternable thick film technology for advanced optoelectronic applications
Development of “Green” Low Temperature Fireable Thick Film Piezo-resistive composite pastes for Strain Gauge Applications Development of “Green” Low Temperature Fireable Thick Film Piezo-resistive composite pastes for Strain Gauge Applications
Hybrid Solar Cells based on Organic Polymers and Inorganic Nanoparticles Hybrid Solar Cells based on Organic Polymers and Inorganic Nano particles
PN/SP/053 Efficient waste water treatment using novel catalyst
Development of optical fiber grade SiCl 4 Development of optical fiber grade SiCl 4
Project Location: Pune Laboratory
Project Type: Sponsored Project
Project Code Project Name Funding Agency Total Outlay in Rs. Achievement
HD/SP/022 Establishment of extended pilot plat facility at C-MET Hyderabad for preparation of 320 kg hafnium sponge VSSC 2591.14 Hafnium process technology demonstrated to Quality Control (QC) team of VSSC as per MoU. Nearly 15 kg of Hf sponge handed over to VSSC for Electron Beam (EB) refining. EB refined Hafnium was meeting the desired specifications. Joint Project monitoring Committee declared successful completion of the project meeting all targeted milestones
PN/TS/011 Study on synthesis of nano-aluminium powder by transferred Arc Thermal Plasma Technique HEMRL, Pune 9.97 Submitted nano Al powder with average Particle size 70-100 nm, SSA 40-60 m2/g and Tap density 0.095 g/cc to HEMRL
PN/TS/007 Accelerometer / gyro packages and mechanical components R & D E (Engrs) 90.00 Submitted the required number of samples to the sponsor
PN/SP/038 Development of stable Pt and Ni doped nanostructured ternary semiconductor catalysts for solar hydrogen production by water splitting ISRO 10.98 Prepared Platinum and Nickel doped nanostructured CdIn2S4 for H2O splitting under visible /solar light
PN/SP/034 Hybrid Solar Cells based on Organic Polymers and Inorganic Nanoparticles DeitY 100.00 Developed prototype hybrid solar cell (HSC) using CdS (Q-dot):P3HT with cell efficiency of 0.6%. The consistent efficiency was 0.3% .
PN/SP/029 Q-Semiconductor -Glass-Nanocomposite for Optical and Energy ( Using Solar Light) applications. DeitY 544.50 Optimized the parameters for Q-CdS and Q-CdSSe–glass nanocomposites at larger batch size for Optical and energy applications with satisfactory results.
PN/SP/052 Development of microwave substrates in LTCCCF NPMASS 32.26 Three different microwave design circuits viz. Dipole anteena, filter circuits and monopulse comparator developed and submitted to the sponsoring agency.
PN/SP/036 Hydrogen production using nanostructured Fe: TiO2 and N: TiO2 thin films and powders DST (Indo –Slovenia Collabora-tive project) 9.41 The nanostructured Fe: TiO2 and N: TiO2 samples were optimized and sent to Slovenia for water splitting. The results were found satisfactory.
PN/SP/035 Development of green low temperature firable thick film peizoresistive composite pastes for strain gauge applications DRDO 48.35 The developed piezoresistors showed good reproducibility, repeatability with the guage factor(GFL and GFT) respectively in the range of 7-15 and 2-4.
PN/SP/040 Development of prototype aprons, glass sheets and curtains from Lead free X-Ray absorbing materials DeitY 112.58 Two types of aprons have been fabricated and tested in BARC
PN/SP/039 Development of optical isolators using quantum dots based photonic glasses DeitY 156.08 The samples have been optimized on newly installed Magneto-optical Faraday Rotation equipment. The repeatability of glass samples has been tested
PN/SP/043 In-house development of photo-conducting paste (using semiconductor nanostructures) for exploration in photo patternable thick film technology for advanced optoelectronic applications DeitY 90.00 Detailed technology document and product cost calculation in respect of photopatternable paste and photosensor completed. Following two prototypes were developed and demonstrated in the laboratory- a)Automatic car light dimmer b)High speed digital objects counter.
PN/SP/044 Development of the prototype photoreactor for the hydrogen production from H2S Under natural sunlight MNRE 22.40 The prototype photoreactor has been developed successfully. Trials of hydrogen production using Ag3PO4 nanoparticles in glass nanocomposite photocatalyst from H2S under natural sunlight have been completed.
PN/SP/042 Novel solar light driven bismuth sulphide quantum dot-glass nanocomposite photocatalyst for hydrogen generation. DST 25.76 Optimization of hydrogen generation process and generation of hydrogen gas using optimized conditions is completed
PN/SP/032 Development of Advanced processes in LTCC Deity + NPMASS+CMET Rs 10,25,36,000 /- Demonstration of test package C with through bores,electrical interconnects with brazed pins were done. ‘Zero’ shrinkage capability: <±1% shrinkage achieved.
PN/SP/021 Development of multilayer LTCC substrates for Thin Film Gas Sensors BRNS, Mumbai Rs 42,68,751/-
PN/SP/013 Technology Demonstration of Multilayer LTCC Packages for MEMS application National Program on Smart Materials Rs 5,25,90,000/-
In-house development of photo-conducting paste (using semiconductor nanostructures) for exploration in photopatternable thick film technology for advanced optoelectronic applications In-house development of photo-conducting paste (using semiconductor nanostructures) for exploration in photopatternable thick film technology for advanced optoelectronic applications DeitY 90 Lakhs
Development of “Green” Low Temperature Fireable Thick Film Piezo-resistive composite pastes for Strain Gauge Applications Development of “Green” Low Temperature Fireable Thick Film Piezo-resistive composite pastes for Strain Gauge Applications DRDO 48.35 The developed piezoresistors showed good reproducibility, repeatability with the guage factor(GFL and GFT) respectively in the range of 7-15 and 2-4.
Hybrid Solar Cells based on Organic Polymers and Inorganic Nanoparticles Hybrid Solar Cells based on Organic Polymers and Inorganic Nano particles DeitY 100 Lakhs Developed prototype hybrid solar cell (HSC) using CdS (Q-dot):P3HT with cell efficiency of 0.6%. The consistent efficiency was 0.3% .
PN/SP/053 Efficient waste water treatment using novel catalyst INDO-UKIERI, DST 4.91 Lakhs Scientists from C-MET, Pune visited UCL at UK.  Samples, i.e. nitrogen doped ZnO (optimized) have been prepared and used for water purification. 
Development of optical fiber grade SiCl 4 Development of optical fiber grade SiCl 4 DIT-NPC, New Delhi 16.74 Lakhs
Project Location: Hyderabad Laboratory
Project Type: Sponsored Project
Project Code Project Name Funding Agency Total Outlay in Rs. Achievement
HD/SP/027 Development of CdS/CdTe thin film solar cells by electrochemical technique using indigenously produced starting materials DST 68.20 Project successfully completed meeting the targeted specifications.
HD/SP/022 Establishment of extended pilot plat facility at C-MET Hyderabad for preparation of 320 kg hafnium sponge VSSC 2591.14 • Hafnium process technology demonstrated to Quality Control (QC) team of VSSC as per MoU. • Nearly 15 kg of Hf sponge handed over to VSSC for Electron Beam (EB) refining. EB refined Hafnium was meeting the desired specifications. • Joint Project monitoring Committee declared successful completion of the project meeting all targeted milestones
HD/SP/010 Development of ultra high purity gallium for epitaxial electronic & optoelectronic applications DST 28.40 • Process technology for preparation of ultra high pure (7N) gallium has been optimized with contamination control . • Using purified gallium, GaAs LPE layer(s) were grown and tested the quality of the layer(s) .
HD/SP/035 Silicon Carbide (SiC) single crystal bulk growth process development DMRL (DRDO) 998.74 Lakh Phase-I has been successfully completed .6H & 4H SiC crystals have been grown successfully.HRXRD analysis confirmed the acceptable quality of grown SiC crystals.
HD/SP/030 Synthesis & photocatalytic activity of bulk & nanosized metal titanates SERB, DST 25 Lakhs
HD/SP/028 Ultra-high purification and preparation of crystalline germanium for detector and optoelectronic applications. BRNS 23.90 Lakhs Developed high purity germanium as per the requirement.
CMET-HD/SP/026 RoHS testing of mobile cellular phones in the Indian Market Indian cellular Associat-ion (ICA) 13.07 Eleven numbers of mobile phones of different brands available in Indian grey market have been analyzed. Majority of them are found to be not in compliance with RoHS directive with respect to Pb content.
CMET-HD/SP/025 Development of Ultra High Pure Gallium for epitaxial Electronics & opto-electronic application.
CMET-HD/SP/024 Environmentally sound methods for recovery of metals from printed circuit boards (PCB’s) DeitY 96.4 E-waste calciner was designed, fabricated and erected at E-Parisara and trial runs were carried out. The Pyrolyser is working satisfactorily for normal PCB’s. Preliminary studies were carried out for electrolysis.
CMET-HD/SP/023 R & D of new materials based on recycling of reactive and refractory metal scrap through electron beam method (Indo-Bulgarian Scientists exchange Program DST 5.73 Scientists from C-MET visited IE-BAS, Bulgaria and presented the results.
CMET-HD/SP/021 Ultrahigh quality Silicon Carbide (SiC) single crystals by physical vapor transport (PVT) technique for advanced electronic devices.
CMET-HD/SP/020 Design and development of controlled melting and freezing system for preparation of ultra pure crystalline materials for opto-electronics.
CMET-HD/SP/019 Process technology development of ultra pure Cadmium for opto-electronic applications
CMET-HD/SP/018 Establishment of testing facilities for the hazardous substances as per European Union (EU) Directive of Restricting the use of hazardous substances (RoHS)
CMET-HD/SP/017 Microwave sintering of refractory metal and alloy powders and properties characterization
CMET-HD/SP/015 Pre-production studies of Niobium & Hafnium for establishment of production plant VSSC, Trivendrum
CMET-HD/SP/016 Studies on the synthesis and phase transformation of FePt nano particles for Data Storage Applictions
Project Location: Thrissur Laboratory
Project Type: Sponsored Project
Project Code Project Name Funding Agency Total Outlay in Rs. Achievement
TH/SP/034 Development of Supercapacitor and applications in electronic circuits BRNS 22.18 Developed aerogel supercapacitors of cell capacitance 1-4 F using carbon aerogel as electrode material and the samples were given to BARC for circuitry applns.
TH/SP/033 Development of transparent conducting oxides through solution processes for thin film electronics BRNS 22.46 Fabricated n and p type transparent conducting oxide thin films by dip coating technique on quartz substrates and optimised the parameters. The films exhibited good electrical and optical properties
TH/SP/043 Development of Graphene based Super capacitors for Energy Storage and Frequency Regulation in smart power grids CPRI 25.00 Graphene supercapacitors were developed having different capacitance varying from 0.5F to 30 F . Graphene supercapacitors having equivalent seies resistance(ESR)upto 0.2 ohms were made. These supercapacitors also shows high reliability by retaining 80% capacitance even after 1000 cycles.
TH/SP/037 Preparation of carbon aerogels & development of aerocapacitor for Electronic applications DeitY 244.43 Developed aerocapacitor of cell capacitance 1-3F and 25-35 F and fine tuned the process of aerocapacitor fabrication.
TH/SP/030 Development cum production and supply of Microwave substrates for 750 W solid state amplifiers BRNS 196.00 Process parameters were optimized to obtain ceramic filled PTFE composites having effective dielectric constant, r = =3.5±0.03 and tan =0.0018 at 10GHz.
TH/SP/047 Development of graphene based transparent electrodes for thin film acoustic actuators and sensors BRNS 20.15 Graphene- PVDF thin film acoustic actuators and sensors were developed. Demonstrated PVDF- graphene thin film transducers as thin film speakers and microphones
TH/SP/050 Development of graphene supercapacitors for power electronics MeitY 80.11 Developed graphene supercapacitors which meet the targeted specifications. Graphene supercapacitor banks were made and tested. ToT for quickly rechargeable emergency was approved by GC held on 19.12.2016. Initiated the process for inviting the Expression of Interest (EoI) from industries
TH/SP/039 Development of light triggered graphene polymer nano-composite actuators DST 19.47 Photomechanical actutation of graphene polymer nano-composite was demonstrated. The photomechanical stress for graphene PDMS nano-composite is more than 100% that of CNT PDMS nano-co
TH/SP/053 Development, production and supply of Microwave substrates BRNS 212.53 Reliabilty studies performed on indigenously developed microwave substratesby fabricating high power solid state amplifiers and integrating into INDUS-2 particle accelerator at RRCAT Indore with an outpot power of 540W. 300 ultra low loss microwave substrates meeting all targeted specifications were delivered to user agency viz. RRCA
TH/SP/044 Dr K V Baiju Development of nanostructured titania photoanode for dye sensitised solar cell applications DST-SERB 10.79 Different nanostructures such as titania nanotube, rod sheet are prepared through hydrothermal method and used for DSSC applications. The efficiency of DSSC achieved so far in the range of 4-
VK-1 Development and pilot production of Nano-PZT compositions and Piezoceramic components for Underwater SONAR Transducers, Ultrasonic cleaners, and Medical applications DeitY 205.30 Lakhs
TH/SP/042 Development and pilot production of Nano- ZnO for electronics and deep-desulpharisation catalyst applications DST 69.92 Established Pilot plant facility for production of Nano-ZnO. Nano-ZnO produced at C-MET was tested at SUD-CHEMIE India, Cochin and found to meet all the targeted requirements for desulpharisation applications .
TH/SP/015 Developement of BMT ceramics for space applications VSSC 1340000
TH/SP/009 Development of high permittivity polymer ceramic composite substrates for Microwave communication application BRNS 1432875
TH/SP/011 Development of temperature compensated high permitivity polyceramic laminates for Microwave substrate application DST 1437833.00
TH/SP/019 Development of polymer woven glass based low permitivity and low Microwave substrate Dept. of Space 943000.00
TH/SP/026 Development of ultra low loss temperature stable composite substrates for high power Microwave amplifiers BRNS 6748742.00
TH/TS/030 Development,production and supply of Microwave substrates for high power Microwave amplifiers. BRNS 21361402.00
TH/SP/041 Development and pilot plant production of high permittivity and low loss ceramic fill PTFE substrates for Microwave circuit application DST 234.58 abricated Copper cladded microwave substrates having dielectric constant, r =6.15±0.15 and loss tangent tan =0.0018 at 10GHz.
TH/SP/048 Development of low loss and medium permitivity composite dielectric for radial power combiners BRNS 3667000
TH/SP/046 DEV.OF TITANIA AEROGEL PHOTOANODE FOR DYE SENSITIZED SOLAR CELL NANOMISSION, DEPT. OF SCI.& TECH., GOVT OF INDIA 44.50 LAKHS Developed high surface area (150 m2/g) nanocrystalline (10-20 nm) titania aerogel through supercritical drying technique Fabricated DSSC multilayer sturctured photoanodes using titania aerogel Fabricated titania aerogel based DSSC test cell Aerogel based DSSC exhibited higher efficency than standard powder available in the market.
Th/SP/029 Pilot plant production of 300Kg of phase pure Cristobalite for space applications ISRO 61 Lakhs
TH/SP/027 Synthesis of Nano NTC Material and Development of Chip in Glass Fast Response Thermal Sensors DeitY 323.62 lakhs
TH/SP/039 Development of light triggered graphene/polymer nanocomposite actuator DST 19.47 Lakhs Photomechanical actutation of graphene polymer nano-composite was demonstrated. The photomechanical stress for graphene PDMS nano-composite is more than 100% that of CNT PDMS nano-c
TH/SP/043 Dev. of Graphene based Supercapacitors for energy storage and frequency regulation in smart power grids CPRI 25 Lakhs
TH/SP/047 Dev. of graphene based transparent electrodes for thin film acoustic actuators and sensor BRNS 20.15 Lakhs
TH/SP/050 Dev. of graphene super capacitors for power electronics DeitY 72.83 Lakhs
TH/SP/020 Dev. of Aerogel for button cell Supercapacitors DST (Govt. of India) Rs. 20.27 Lakhs
TH/SP/034 Dev. of Supercapacitors for Applications in Electronic Circuits BRNS, DAE, Govt. of India Rs. 22.18 Lakhs
TH/SP/035 Dev. of Nanoparticles doped Aerogel based Hydrogen Storage Materials DST (Govt. of India) Rs. 165.05 Lakhs Developed Ni,Co & Pd-nanoparticles doped carbon aerogels and 1 wt% of Pd-doped activated carbon aerogel exhibited a max. H2 uptake of 4.2 wt% at 77K.
TH/SP/037 Dev. of Aerocapacitor for Electronic Applications DeitY (Govt. of India) Rs. 244.30 Lakhs
TH/SP/032 Piezoelectric based Bimorph Mirror BRNS 29 Lakhs
TH/SP/038 ML actuators for MEMS based micro valve DeitY 108.26 ML actuators, were developed. evaluated their properties and delivered.
TH/SP/048 Development of low loss and medium permittivity composite dielectric for radial power combiners Board of Research in Nuclear Sciences 42.80 Delivered 25 number of miniaturized composite dielectric structures for radial power combiner Carried out system level evaluation at user agency (RRCAT, Indore) and found that the return loss is 2dB better than commercially available ones Dual band dielectric resonator loaded radial combiner design is successfully designed in HFSS.
TH/SP/033 Development of transparent conducting oxide through solution processes for thin film electronics BRNS, Mumbai 19.96 Lakhs
TH/SP/049 Development of Thin Film Solar Cell with Earth abundant Kesterite Absorber Department of Science and Technology 45.83 Lakhs Developed phase pure kesterite (CZTS) thin film absorber films by solution routes meeting all the targeted specifications. CdS buffer layer was coated by chemical bath deposition Aluminium doped ZnO top layer was coated by radio frequency (RF) sputtering. Developed kesterite based prototype thin film solar cell with device structure SLG/Mo/CZTS/CdS/AZO using manually coated Ag collection grid. The cell exhibited an efficiency of 7.8%.
TH/SP/036 Multilayer actuators for MEMS based micro valve NPMASS 57.37 Fabricated ML actuators as per the specifications.

Live Telecast

 

(OR)

Search in youtube clickhere

(OR)